Publicité
Temp.
-20
-10
0
10
20
10W/30
10W/40
20W/40
20W/50
-4
14
30
50
68
ENGINE OIL REPLACEMENT
°C
30
40
50
86
104
122
°F
a
b
3 - 6
(Except for USA and CDN)
Recommended oil:
Refer to the following chart for
selection of oils which are suited
to the atmospheric temperatures.
Recommended engine oil classi-
fication:
API STANDARD:
API "SE/SF" or higher grade
(Designed primarily for motor-
cycles)
CAUTION:
Do not add any chemical additives or use
oils with a grade of CD a or higher.
Do not use oils labeled "ENERGY CON-
SERVING II" b or higher. Engine oil also
lubricates the clutch and additives could
cause clutch slippage.
Do not allow foreign materials to enter the
crankcase.
5. Start the engine and let it warm up for
several minutes.
CAUTION:
When the oil tank is empty, never start the
engine.
6. Idle the engine more than 10 seconds
while keeping the motorcycle upright.
Then stop the engine and add the oil to
the maximum level.
7. Install:
Dipstick
ENGINE OIL REPLACEMENT
1. Start the engine and let it warm up for
several minutes.
2. Stop the engine and place an oil pan
under the drain bolt.
3. Remove:
Dipstick 1
Drain bolt (with gasket) 2
Drain the crankcase of its oil.
INSP
ADJ
Publicité
Chapitres
