Led Indicator; Troubleshooting; The Headphones Cannot Be Switched On; No Audio Signal For Bluetooth Connection - SilverCrest SBTH 2.1 A1 Manuel D'utilisation Et Informations Sur Les Services

LED indicator

Refer to the table below for the different statuses of the LED (3):
Switching on Bluetooth
function
Pairing mode
Standby mode (not
connected)
Connected
Battery status low
Battery is charging
Battery charging completed

Troubleshooting

The headphones cannot be switched on.


Charge the battery.
No audio signal for Bluetooth

Switch on the headphones.

Try to connect the headphones again to the external audio source.
®
LED (3) lights up blue for approx. 2 seconds.
LED (3) alternates between flashing orange
and blue.
LED (3) flashes blue twice briefly every 5
seconds.
LED (3) flashes blue once briefly every 10
seconds.
LED (3) flashes orange twice briefly every 30
seconds.
LED (3) lights up orange continuously.
In charging mode: LED (3) goes out.
SilverCrest SBTH 2.1 A1
®
connection
English - 57