Using The Appliance - Philips HF3490 Mode D'emploi

Masquer les pouces Voir aussi pour HF3490:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
When the hour indication on the display flashes, move the middle dial up or down to
select the hour.
2
Press the middle dial gently and release it to confirm.
The minute indication starts flashing (Fig. 9).
,
3
Move the middle dial up or down to select the minutes.
4
Press the middle dial gently and release it to confirm.
The appliance leaves the menu and the display shows the set clock time.
,
The appliance is now ready for use.
Note: Every time you remove the plug from the wall outlet for more than approximately 15 minutes, you
have to set the clock time again by following steps 1 to 4 above.
Note: To change the set clock time when the plug is still in the wall outlet, press the middle dial gently
two times to enter the menu for setting the clock time. You are in the menu when the hour indication
flashes. Then follow steps 1 to 4 above.

Using the appliance

Use this appliance for its intended household use as described in this manual.
Top and bottom dials
-
With the top dial you can switch the lamp on or off and set the light intensity (see section
'Using the lamp' in this chapter).
-
With the bottom dial you can switch the radio on or off and set the volume (see section 'Radio/
volume' in this chapter).
Note: Press the dial gently and release it to switch on or off the light (top dial) or radio (bottom dial)
and move the dial up or down to change the light intensity (top dial) or volume level (bottom dial).
Middle dial
The middle dial allows you to choose various functions from the menu. These functions appear in
the menu in the following order:
-
Clock time
-
Alarm time
-
Alarm sound
-
Dusk simulation function
-
Display brightness function
You can operate the middle dial in the following way:
1
Press the middle dial gently and release it to enter the menu (Fig. 10).
Do not press the dial too hard. If you do, the dial does not work.
2
Move the middle dial up or down to select a function (Fig. 11).
3
Press the middle dial gently and release it to enter this function.
4
Move the middle dial up or down to select an option in this function.
5
Press the middle dial gently and release it to confirm.
If you do not operate the dial for 5 seconds when you are in the menu, the appliance
automatically leaves the menu and displays the clock time again.
09_HF3490_Oct.indd 11
EnglisH
11
10/15/09 12:54:05 PM

Publicité

Table des Matières
loading

Table des Matières