Philips HF3490 Mode D'emploi page 18

EnglisH
14
Volume
1 To set the volume, move the bottom dial up or down to select the volume level you prefer.
You can choose a volume level between 1 and 20.
Note: The volume level you select is automatically set as the volume level for the alarm as well.
Note: The iPod/iPhone volume setting does not have an effect on the volume setting of the Wake-up Light
speaker.
Using your ipod/iphone with the Wake-up light
With the base, you can use the Wake-up Light as a speaker for your iPod/iPhone. When you put the
iPod/iPhone in the iPod/iPhone station, the iPod/iPhone is charged automatically.
The appliance is supplied with 4 iPod/iPhone-station adaptors to make sure that most common
iPod/iPhone versions fit properly in the iPod/iPhone station.
You can use the base with the following iPods and iPhones:
- iPod nano 1G
- iPod nano 2G
- iPod nano 3G
- iPod nano 4G
- iPod Touch
- iPod Touch 2G
- iPod 5G (video) 30GB
- iPod classic 80GB/120GB
- iPod 5G (video) 60GB/80GB
- iPod classic 160GB
- iPhone
- iPhone 3G
Note: If you have an iPod/iPhone that does not fit into the iPod/iPhone station with one of the
universal adaptors provided with this Wake-up Light, you can order an adaptor from Apple.
1 Place the Wake-up Light on the base (see section 'Installing the appliance' in chapter
'Preparing for use') (Fig. 5).
2 If necessary, place one of the adaptors in the iPod/iPhone station.
3 Place your iPod or iPhone in the iPod/iPhone station (Fig. 27).
The word 'iPod' appears on the display and the iPod symbol flashes for 3 seconds.
,
After 3 seconds, the word 'iPod' and the iPod symbol disappear from the display.
,
Note: If you have selected your iPod/iPhone as the alarm sound, the iPod symbol stays on the display.
4 To play music from your iPod/iPhone, you can operate the iPod/iPhone as you normally
would. If you do not know how to use your iPod/iPhone, follow the instructions in the user
manual supplied with your iPod/iPhone.
The music on your iPod/iPhone comes out of the speaker of the Wake-up Light.
,
Your iPod/iPhone is charged automatically when it is in the iPod/iPhone station.
,
Note: To set the music on your iPod/iPhone as alarm sound, follow the instructions in section 'Setting the
alarm sound' in this chapter.
Note: The iPod/iPhone volume setting does not have an effect on the volume setting of the Wake-up Light
speaker. To set the volume, move the bottom dial of the Wake-up Light up or down to select the volume
level you prefer.
Note: When you have connected your iPhone to the Wake-up Light and a call comes in, the music or the
radio goes out and the default ringtone of the iPhone comes out of the speaker of the Wake-up Light.
09_HF3490_Oct.indd 14 10/15/09 12:54:05 PM