Information On This Manual; Safety - Rational iCombi Pro Installation

en-US
1

Information on this manual

This document is a version of the installa-
tion instructions. Please note the respec-
tive version and date.
This manual describes the setup of Combi-
Duo for the devices:
LM1: iCombi Pro (iCP) 6 half size to 10
n
full size
LM2: iCombi Classic (iCC) 6 half size to
n
10 full size
This manual is a supplement to the device
installation manual for iCombi Pro /
iCombi Classic. Read this manual com-
pletely before carrying out the setup. The
installation manual enables safe handling
of the devices and correct installation.
The images in this installation manual are
examples only and may differ from the de-
vice.
Information on the water connection,
wastewater connection, electrical connec-
tion and, for gas devices, the gas and ex-
haust gas connection, can be found in the
device installation manual for iCombi
Pro / iCombi Classic.
All information from the device installation
manual for iCombi Pro / iCombi Classic
applies accordingly.
2

Safety

The devices are designed so that they do
not pose a danger when installed correctly.
This manual describes proper installation
of Combi-Duo.
Observe all safety information in the in-
stallation manual for iCombi Pro / iCombi
Classic.
Observe the relevant country-specific
n
and local regulations and standards in
your country.
4 / 20
The device should only be connected
n
in accordance with the installation
manual and the information on the
type plate.
Switch off the device when discon-
n
necting it from or connecting it to the
power supply.
Also observe the following danger warn-
ings for setting up Combi-Duo:
Risk of crushing or injury when tilting
or turning the Combi-Duo setup
The setup could fall off the installation
surface when tilting or turning the
Combi-Duo setup.
Do not tilt the setup on the
n
installation surface.
When turning the setup, ensure that
n
the weight of the devices is evenly
distributed and the feet or guide
rollers of the stand or leveling kit are
on the installation surface.
Fix the setup with accessories
n
specified by the manufacturer.
Risk of burns due to hot exhaust pipes.
The exhaust pipes and exhaust gas
pipes can get extremely hot during
operation of the Combi-Duo setup.
Do not touch the exhaust pipes
n
during operation.
For gas devices: Do not touch the
n
exhaust gas pipes during operation.
80.51.373_iCombi Pro-iCombi Classic_CD E_IM_V02_US-nord
1 | Information on this manual
WARNING
WARNING