Kit Includes; Tools Needed; Key Definitions - Petsafe S1-4W-11 Guide D'installation

Kit Includes

Exterior Frame

Tools Needed

Hammer
Slotted & Phillips
Screwdrivers
NOTE: The 4-Way Cat Door can be installed in most interior doors and walls. Installation in thinner or thicker
applications may require additional skills, tools and materials (such as wood framing and hardware).

Key Definitions

• Outer Frame Size: Overall pet door dimensions
• Cut-Out Size: Dimensions of opening cut in homeowner's door for proper fit and pet door installation
• Flap Opening Size: Usable flap size for pet to enter and exit through pet door
• Interior Frame: Pet door frame with flap and 4-way lock
• Exterior Frame: Pet door frame without flap or 4-way lock
• 4-Way Lock: White tab on bottom of interior frame used to control the pet's access to the pet door.
4
Interior Frame
with flap and
4-way lock
foam tape (4pcs.)
Drill
½" (13mm) Drill Bit
Jigsaw
" (3mm) Drill Bit
7
/
64
for metal doors
Pencil
" (2mm) Drill Bit
5
/
64
for wood doors
Customer Care Center 1-800-732-2677
¾" (19mm)
Screws (4pcs.)
Double sided
Level
Masking or
Painter's Tape
4- Way Locking
Interior Cat Door
Shoulder Height Shoulder Height
Tools Needed
NOTICE
When applying cutting template
there should be a minimum of 3"
between the bottom and sides of
the door and the outer edge of the
cutting template to maintain the
structural integrity of the door.
Center
Line
Radio Systems Corporation • 10427 PetSafe Way, Knoxville, TN 37932
1-800-732-2677 • www.petsafe.net • 2015 Radio Systems Corporation
408-100
Cutting Template
Installation
Guide
Tape Measure
Safety
Equipment