Using Your Refrigerator; Ensuring Proper Air Circulation; Multi Flow; Setting The Controls - LG LRDN2272 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENSURING PROPER AIR CIRCULA TION
In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, cool air enters through the bottom
of the freezer section and moves up. Most of the air then
flows through the freezer section vents and recirculates
under the freezer floor. The rest of the air enters the
refrigerator section through the top vent.

MULTI FLOW

The cooling fan operates more powerful and effective
than in normal operation. This is specially noticeable
when new food is placed in the refrigerator compartment.
If water or foreign substances enter the cool air vent
while cleaning, efficiency will be lowered. In addition, if
gasket is damaged, efficiency may be lowered because
of escaping cool air.
Do not block any of these vents with food packages. If
the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer to
the other. Y ou must thoroughly clean both sections to
eliminate odors. T o prevent odor transfer and drying out of
food, wrap or cover foods tightly. (See the Food Storage
Guide section for details.)

USING YOUR REFRIGERATOR

20

SETTING THE CONTROLS

Your refrigerator has two controls that let you regulate
the temperature in the freezer and refrigerator
compartments.
Initially set the REFRIGERATOR CONTROL at 37°F
(3°C) and the FREEZER CONTROL at 0°F ( -18°C).
Leave it at this setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature
as desired.
Premium Model
Refrigerator control: 32°F to 46°F (0°C to 8°C)
The lower the number setting, the colder the refrigerator
compartment will become.
REFRIGERATOR TEMP
COLDER
WARMER
Freezer control: - 6°F to 9°F (- 21°C to - 13°C)
When the setting is at a lower number, the freezer
compartment becomes colder. But the refrigerator
compartment becomes warmer because less cold air
flows into the refrigerator.
Express Freezing:
Press the Express Freezing key and the LED will turn
on. This function will remain activated for 24 hours and
intensify the cooling speed of freezer and increase the
amount of ice.
EXPRESS
FREEZING
0 F IS RECOMMENDED
NOTE: T o change °F/°C press and HOLD COLDER key
c o f freezer and COLDER key of refrigerator over 1 sec. at
the same time.
Dispenser Model
Refrigerator control: 32°F to 46°F (0°C to 8°C)
The lower the number setting, the colder the refrigerator
compartment will become.
REFRIGERATOR TEMP
DISPENSER
COLDER
WARMER
LOCK
Freezer control: -6°F to 9°F (- 21°C to - 13°C)
When the setting is at a lower number, the freezer
compartment becomes colder. But the refrigerator
compartment becomes warmer because less cold air
flows into the refrigerator.
EXPRESS
FREEZING
F IS3 R 7 ECOMMENDED
FREEZER TEMP
COLDER
WARMER
EXPRESS
FREEZING
F IS 3 R 7 ECOMMENDED

Publicité

Chapitres

Table des Matières
loading

Table des Matières