Using Your Refrigerator; Setting The Controls; Ensuring Proper Air Circulation - LG LFX25970 Serie Guide D'utilisation Et D'entretien

SETTING THE CONTROLS

Temperature
• Your refrigerator has a control pad on the dispenser that
lets you regulate the temperature in the freezer and
refrigerator compartments.
• Initially set the REFRIGERATOR CONTROL at 37°F
(3°C) and the FREEZER CONTROL at 0°F (–18°C).
Leave it at this setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature as
desired.
• Every time you touch the freezer temperature adjust
button, the temperature changes in a circulating order of
"0"¡"-1"¡"-2"¡"-3"¡"-4"¡"-5"¡"-6"¡"8"¡"7"¡"6"¡"5"
¡"4"¡"3"¡"2"¡"1"¡"0".
• Every time you touch the refrigerator temperature adjust
button, the temperature changes in a circulating order of
"37"¡"36"¡"35"¡"34"¡"32"¡"47"¡"45"¡"44"¡"43"¡
"42"¡"41"¡"39"¡"38"¡"37".
Ice Plus
• When you touch the "ICE PLUS" button, the graphic
[ ] will light up in the display and it continues for
24hours. It will automatically shut off after 24hours have
passed.
Or you can stop this function manually by touching the
button one more time.
• This function imcreases both icemaking and freezing
capabilities.
Dispenser
• You can select water, crushed ice, or
cubed ice by touching
you desire.
• There could be some dripping after
dispensing.
It is recommended to hold your cup for
a couple of seconds after dispensing.
NOTE : The dispenser is desinged not to operate while
either refrigerator door is left open.
Get user manuals: See SafeManuals.com

USING YOUR REFRIGERATOR

button as
Filter
• It displays in months the number of months left to
exchange the filter from the moment power is connected
to the refrigerator.
• If you have changed the filter after 6 months of use or
want to reset the filter display, press and hold the Filter
Reset Button 3 seconds or more and the filter display
will be initialized with a buzzing sound.
NOTE : The average life of the filter is 6 months.
Auto Light
• The dispenser lamp is on or off automatically by brightness of
the room discovered from the light senser.
Light / Light Sensor
• If the light is set "Auto" mode, dispenser light will automatically
turn on and off according to the brightness of room detected by
light sensor.
Alarm
• When the power is connected to the refrigerator, door
alarm is initially set OFF and door alarm display will
show . When you touch
change to and door alram function is now activated.
• When either refrigerator or the freezer door is left open
for more than 60 seconds, the alarm will ding to let you
know the door is open.
• When you close the door, the door alarm will stop dinging.
• If you want to disable the door alarm function, touch
button then the door alarm display will switched to
Lock
• When the power is initially connected to the refrigerator,
Lock Function is Off.
• If you want to activate Lock Function to lock other
buttons, press and hold
more. sign will be displayed and the Lock Function
is now enabled.
• No buttons other than
including dispenser button while Lock Function is
enabled.
• To disable the Lock Function, press and hold
for 3 seconds or more.
• Temperature Mode Switch Function (°F <->°C)
: If you want to convert °F to °C or vice versa, press and
hold button and
seconds or more.

ENSURING PROPER AIR CIRCULATION

Do not block air channels with any objects or food for air
circulation to prevent food loss due to the lack of cooling
air.
16
button, the display will
button for 3 seconds or
button will work even
button
button simultaneously for 5
.