Installation; Installation Overview - LG SIGNATURE URNTS3106N Manuel Du Propriétaire

INSTALLATION

Installation Overview

Please read the following installation instructions first after purchasing this product or transporting
it to another location.
1 Unpacking your
refrigerator
4 Connecting the
water supply and
water line
1/8"±1/16" mm 1/8"±1/16" mm
NOTE
Connect to potable water supply only.
2 Choosing the proper
location
5 Leveling and Door
Alignment
• It may be necessary to increase the
refrigerator's tilt after the door bins are
filled to compensate for the increased
weight of the doors.
• Check if the gap between Holder and
Pillar is 1/8±1/16" (4±2 mm). As in the
figure, pull forward and backward with
hand with speedy feeling, and check if
Pillar is normally folded and spread.
INSTALLATION
3 Disassembling/Assembling
9