Voice Assistant; Air Filter; Using The Wi-Fi Eclipse Display - LG SIGNATURE URNTS3106N Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To change the temperature mode from °F to °C
(or vice versa) press and hold the Refrigerator
and Freezer temperature buttons simultaneously
for approximately five seconds. The temperature
indication on the display window switches
between Celsius and Fahrenheit.
NOTE
The displayed temperature is the
target temperature, and not the actual
temperature of the refrigerator. The actual
refrigerator temperature depends on the
food inside the refrigerator.

7 Voice Assistant

Changes voice assistant settings. This button
allows the appliance to connect to a home Wi-
Fi network. Refer to SMART FUNCTIONS for
information on the initial setup of the LG ThinQ
application.
8 Ice Plus / Air Filter
Ice Plus
This function increases both ice making and
freezing capabilities.
• Press Ice Plus to illuminate the icon in the
display and activate the function for 24 hours.
After 24 hours, the icon and the function
automatically turn off.
• To deactivate the function manually, press Ice
Plus again.

Air Filter

The Fresh Air Filter helps remove odors from
the refrigerator. The Fresh Air Filter will cycle on
and off in increments of ten minutes on and 110
minutes off.
9 Display
The display indicates the current status of the
refrigerator. Press any button to display the
current setting for that function.

Using the Wi-Fi Eclipse Display

• To turn the display on, open a refrigerator
or freezer door or knock twice on the
InstaView™Door-in-Door® to activate the
interior LED
• The display turns off automatically five
seconds after all the doors are closed or five
seconds after you have knocked twice on
the InstaView™Door-in-Door®.
• The display buttons operate using static
electricity. Wear gloves while cleaning to
avoid activating button functions.
• Keep the display clean and free from foreign
substances. Skin must contact the buttons
directly for them to properly function.
• Wipe any moisture off the display before
using it. Moisture on the display may
interfere with the functioning of the buttons.
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the
refrigerator and freezer sections to conserve
energy while on display in a retail store.
When you turn on the interior display, "Demo
Mode" appears in the display.
To deactivate / activate:
With InstaView™Door-in-Door® opened,
press and hold the Refrigerator and Ice Plus
buttons at the same time for five seconds.
When demo mode is activated, the control
panel will beep and the temperature settings
will display as "Demo Mode" for five seconds
and then return to normal temperature
display. Use the same procedure to deactivate
the Display Mode.
HOW TO USE
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Urntc2306nUrntc2306n.agrcna0

Table des Matières