LG SIGNATURE URNTS3106N Manuel Du Propriétaire page 42

42 SMART FUNTIONS
NOTE
• If the appliance cannot be registered
due to problems with the wireless signal
transmission, unplug the appliance and
wait about a minute before trying again.
• If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
• The wireless network name (SSID) should
be a combination of English letters and
numbers. (Do not use special characters.)
• Smartphone user interface (UI) may vary
dependingon the mobile operating system
(OS) and themanufacturer.
• If the security protocol of the router is set to
WEP, network setup may fail. Change the
security protocol (WPA2 is recommended),
and register the product again.
Installing the LG ThinQ Application
Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a smart
phone. Follow instructions to download and
install the application.
Connecting to Wi-Fi
The Wi-Fi button, when used with the LG ThinQ
application, allows the refrigerator to connect to
a home Wi-Fi network. The Wi-Fi icon shows the
status of the refrigerator's network connection.
The icon illuminates when the refrigerator is
connected to the Wi-Fi network.
Initial Appliance Registration
Run the LG ThinQ application and follow the
instructions in the application to register the
appliance.
Re-registering the Appliance or Registering
Another User
Press and hold the Wi-Fi button for 3 seconds
to temporarily turn it off. Run the LG ThinQ
application and follow the instructions in the
application to register the appliance.
NOTE
• To disable the Wi-Fi function, press and
hold the Wi-Fi button for 3 seconds. Wi-Fi
icon will be turned off.
Wireless LAN Module Specifications
Frequency Range
Output Power(Max)
2412 to 2462 MHz
< 30 dBm