Front Panel Buttons - Welch Allyn Scale-Tronix 4802D Mode D'emploi

6 Introduction

Front panel buttons

Button
ZERO
Green LED
indicators
Power button
SEND DATA
LB / KG
REWEIGH
RECALL
Function
Press this button to reset the scale value to zero.
This area displays the patient measurement, as well as indicates the measurement units, AC power,
low battery, prior weight, and data transmission.
Press this button to turn the scale on.
Press and hold this button to turn the scale off.
Pressing this button when the scale is connected to a computer sends the current measurement to the
computer, a Welch Allyn Connex Vital Signs
Press this button to change the scale between kilograms, pounds, ounces, and pounds and ounces.
Press this button to perform a new weighing cycle.
Press this button to display the weight stored in the scale's memory.
Welch Allyn Pediatric/Infant Scale
®
Monitor, or a Welch Allyn Connex
®
Spot Monitor.