How To Set The Time - Suunto ADVIZOR Manuel D'instructions

• The Outer Circumference graphically displays time in seconds.
The TIME mode and all sub modes can be adjusted through the setup program of the Wristop Computer.

3.1 HOW TO SET THE TIME

To set the Time:
1. PRESS the [Select] button and hold in for 2 seconds. Located in Field 3, the seconds will begin to flash (Fig.
17).
2. PRESS the [+] button to scroll the seconds upward or PRESS the [-] button to reset the seconds to zero.
3. At the seconds desired, PRESS the [Select] button to move to the next setting. Located on right of Field 2,
the minutes will begin to flash.
4. PRESS the [+] button to scroll the minutes upward or PRESS the [-] button to scroll the minutes downward.
5. At the minutes desired, PRESS the [Select] button to move to the next setting. Located in the center of Field
2, the hour will begin to flash.
6. PRESS the [+] button to scroll the hour upward or PRESS the [-] button to scroll the hour downward.
7. At the hour desired, PRESS the [Select] button to move to the next setting. Located in Field 1, the 24 or 12
hour clock setting will begin to flash.
8. PRESS either the [+] or the [-] button to toggle between the 24hr and 12hr.
Note: if the 12 hour clock is chosen either AM/PM will appear below the hour in Field 2.
9. At the clock setting desired, PRESS the [Select] button to move to the next setting. Located in the center of
Field 2, the year will begin to flash (Fig. 18).
10.PRESS the [+] button to scroll the year upward or PRESS the [-] button to scroll the year downward.
11. At the year desired, PRESS the [Select] button to move to the next setting. Located in the center of Field 3,
the month represented by a number will begin to flash.
12.PRESS the [+] button to scroll the month upward or PRESS the [-] button to scroll the month downward.
13.At the month desired, PRESS the [Select] button to move to the next setting. Located to the right of Field 3,
the day will begin to flash.
14.PRESS the [+] button to scroll the day upward or PRESS the [-] button to scroll the date downward.