Shimano Steps RIDE+ Manuel Du Propriétaire page 45

Brightness < SC-E6010 >
The brightness of the backlight can be adjusted as needed.
1.
Press Assist-Y or Assist-Z to adjust the brightness.
• Brightness can be adjusted to one of 5 levels.
2.
Pressing the Assist-X button enables the set value at
the cursor position and takes you back to the "Setting
menu" screen.
Beep
The beep sound can be turned on/off.
1.
Press the Assist-Y or Assist-Z to move the cursor to the
item you want to configure.
Configurable
items
ON Enable beeps
OFF Disable beeps
2.
Pressing the Assist-X button enables the setting item
indicated by the cursor and takes you back to the
"Setting menu" screen.
Even when [Beep] is set to [OFF], a beep will sound when
there is a misoperation, system error, etc.
Details
39
Assist
Assist
Assist
< SC-E6000 >
Assist
Shift
Shift
Shift
< SC-E6010 >
Shift