Basic Operations; Advanced Cd Or Mp3 Disc Playback; Repeat Play; Random Play - Pioneer X-HM36D Mode D'emploi

Disc playback

Basic operations

Function Main unit Remote
control
Play
Stop
Pause
Track up/
down
Fast
forward/
reverse

Advanced CD or MP3 disc playback

Operation
Press in the stop
mode.
Press in the playback
mode.
(when playing a CD)
"RESUME" is
displayed and the
place where you
stopped play is
memorized. Press
again and the
memorized position

Repeat play

is cleared.
Repeat play can play one track, all tracks or a programmed
Press in the playback
sequence continuously.
mode. Press 1; to
To repeat one track:
resume playback
from the paused
Press
point.
ENTER.
Press in the playback
To repeat all tracks:
or stop mode.
Press
If you press the
ENTER.
button in the stop
To repeat desired tracks:
mode, press 1; to
start the desired
Perform steps 1 - 5 in "Programmed play (CD)" section
track.
(page 16) and then press
(when playing MP3)
ALL" appears. Press ENTER.
You can only skip
To cancel repeat play:
forward or back to
music files inside the
Press
same folder.
ENTER.
Press and hold down
in the playback
mode.
Release the button to
resume playback.

Random play

The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until "RANDOM ON" appears.
Press ENTER.
To cancel random play:
Press RANDOM repeatedly until "RANDOM OFF" appears.
Press ENTER.
repeatedly until "REPEAT ONE" appears. Press
repeatedly until "REPEAT ALL" appears. Press
repeatedly until "REPEAT OFF" appears. Press
Note
• After performing repeat play, be sure to press ∫.
Otherwise, the disc will play continuously.
• During repeat play, random play is not possible.
Note
• If you press the 9 during random play, you can move
to the track selected next by the random operation.
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
repeatedly until "REPEAT
05
15
En