Timer Programming - Velleman DVR1A Mode D'emploi

c) Timer Programming
1) Enter "Timer" Menu
Press the MENU button on the front of the device, enter the
password and confirm it by pressing ENTER (cf. "4a: Open Main
Menu" on p. 7)
Press ▲or ▼until 'Timer' is selected (cf. figure on the right).
Press ENTER to enter the timer menu. The screen as shown on
the right will be displayed.
2) Timer Recording Set-Up
1. Press ENTER to set the day selection of the first line.
2. Press ▲or ▼to select the day set-up:
Daily : every day
SUN : Sunday
MON : Monday
TUE : Tuesday
WED : Wednesday
THU : Thursday
FRI : Friday
SAT : Saturday
MO-FR : Monday to Friday
SA-SU : Saturday & Sunday
JAN-01 : special date.
3. Press ◄ or ► to select the recording start time (HH:MM).
Press ▲or ▼to set the recording start time.
4. Press ◄ or ► to select the recording end time (HH:MM).
Press ▲or ▼ to set the recording end time.
5. Press ◄ or ► to select the number the images per second (IPS).
Press ▲or ▼to set the number of IPS:
NTSC : 1, 2, 4, 8, 15, 30, 60
PAL: 1, 2, 3, 6, 12, 25, 50
OFF : not activated.
REMARK: Recording quality and format are determined in the 'Record' menu.
6. Press MENU to confirm current settings and ENTER to go to the next programming line.
7. Press ▲or ▼to select 'Timer Enable'
Yes: to activate the programmed settings.
No: to ignore the programmed settings.
8. Press MENU to confirm the current set-up and return to the previous menu.
9. Press MENU again to exit and close the Timer menu.
DVR1A
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Timer Enable: No
- 9 -
(Menu)
► Timer
Record
Alarm
Remote
System
Event
(Timer)
Day Start End
00:00 00:00
00:00 00:00
00:00 00:00
00:00 00:00
00:00 00:00
00:00 00:00
00:00 00:00
IPS
Off
Off
Off
Off
Off
Off
Off
VELLEMAN