Secure The Cooktop To Countertop; Electrical Installation; Electrical Requirements; Connect Electrical Supply - Thermador Freedom CIT30XWBB Installation

Secure the cooktop to countertop

CAUTION
9
Do not let the glass drop into place. Make sure that
it is supported along a broad area of the edges
when carefully placing the cooktop into the cutout.

Electrical Installation

Electrical requirements

You can find the identification plate with the electrical
specifications on the underside of the appliance. The
junction box must be located within 3 feet of the cooktop
connection. It should be easily accessible for service
purposes.
8
The appliance must be secured from below using the
hold-down brackets provided, so it does not slip.
Note: Protect delicate countertops by placing a wooden
disk underneath.
Rotate the appliance and position it so that the screws
1.
provided are seated loosely in the holes. Move the
hold-down brackets so that the appliance can be
placed in the cutout.
Place the appliance carefully into the cutout.
2.
Insert the clamping screws into the hold-down
3.
brackets and secure the appliance to the countertop.
Tighten screws.
Power supply

Connect Electrical Supply

CAUTION
9
Before installing, turn off power supply at the service
panel. Lock service panel to prevent power from
being turned on accidentally.
CAUTION
9
To reduce the risk of electric shock and fire, do not
use a flexible power supply cord.
Refer to rating label for more information. See "Customer
Service" for rating label location.
The maximum current rating of the branch-circuit
breaker, the wire sizes and the connections must
conform to the requirements of the National Electrical