Maintenance And Transport; Warranty Conditions - Seac Q3 Instructions

MAINTENANCE AND TRANSPORT

Compliance with the following instructions is required:
• Always carry the torch inside a bag protecting it from any shocks.
• Avoid prolonged exposure to sunrays.
• At the end of each dive (sea, lake or swimming-pool) always rinse in fresh
water and wipe.
• Check the state of O-rings every time the body is opened.
• Clean and lubricate the parts involved in the opening process with silicone
grease.
• It is recommended to have the product inspected every year at an authorized
SEAC centre.

WARRANTY CONDITIONS

SEAC guarantees the product for a period of two years from the date of
purchase.
You are strongly advised to keep the fiscal slip supplying evidence of the date
of purchase.
The warranty does not include standard consumption or wear parts, such as:
• O-rings, batteries, bulbs, glass.
This warranty does not cover damage resulting from:
• Mechanical shocks.
• Use in chlorinated or polluted water.
• Prolonged exposure to strong heat sources exceeding 70 °C.
The warranty is cancelled if:
• The equipment has been improperly used, not following the instructions for use.
• The owner has made modifications or tampered and/or personally carried
out repairs, or if such interventions have been carried out by unauthorized
personnel.
SEAC will not be liable under this warranty for damage caused to the user
through improper use of the equipment. The same is valid for direct or
indirect damage of any nature caused to persons or things due to any
periods of non-use or to misuse of the product.
The spare parts list is available in the downloads section of www.seacsub.com.
18 English
960-manuale seac Q3-Q1-rev B.indd 18 08/02/2016 11.13.02