Kreg Jig K5 Guide De L'utilisateur page 3

Parts
A Base:
Features four holes for securing the jig to a work bench or auxiliary base.
Drill-guide socket:
B
Accepts all Kreg drill guides: Micro, Standard (included), and HD
C Toggle handle:
Operates workpiece clamping mechanism.
D Clamp assembly:
Powerful internal spring applies clamping pressure.
E Ratchet plate:
Provides clamp-assembly adjustment.
F
Ratchet release:
Disengages clamp assembly from ratchet plate.
G
Standard drill guide:
Features marks for positioning the guide for different workpiece thicknesses.
H Locking pin:
Spring-loaded pin locks the drill guide into the drill-guide socket at the selected setting.
I Step bit:
Simultaneously drills a pilot hole and clearance hole, forming a bearing shoulder for the screw head.
J Stop collar:
Controls drilling depth.
K Hex wrench
For the stop-collar set screw.
800-447-8638
L Stop-collar setting block
Ensures proper positioning of the stop collar on the drill bit.
M Driver bit:
#2 square-drive bit 6" long.
Workpiece stop:
N
Stop snaps into keyhole slots in the base.
O
Workpiece stop fi ne-adjustment nut:
¼-20 nut fi ts into hex recess in workpiece stop.
P Knurled nut:
Nylon knurled nut acts as jam nut to fi x the position of the fi ne-adjustment screw.
Q Fine-adjustment screw:
¼-20 x 2 ½" Nylon bolt threads into nut to provide no-slip fi ne adjustment.
R Vacuum port:
Accepts a 1¼" shop vacuum hose for effi cient chip removal, swivels side to side.
S Extensions:
Provide support for wide workpieces and storage for bits and accessories.
T Screw-length selection guide:
Apply this self-adhesive label to the inside of an extension lid for easy reference.
U Spacer block:
In repair applications, positions the drill guide for drilling pocket holes in ¾"-thick material
V Pocket-screw sample pack:
Contains 10 each of the fi ve most often used screws.
W Pocket-hole plug sample pack
Contains fi ve paint-grade wood plugs.
www.kregtool.com