wavin Sentio Guide Rapide page 14

LEDs and Buttons CCU and EUs
Letter* LED/Button
A
B
C
D
E
F
1 – 16
G
H
K
O A – F
* See page A
Function Light
Status Off
Green On
Red On
Warning Yellow flash
Yellow slow flash
Yellow fast flash
Cooling Blue On
LAN status Green On
Green flash
Green fast flash
Blue On
Blue flash
Blue fast flash
Peripherals enrolling Green On
Red flash
Channel Selection -
Actuator channels Red On
Green On
Blue On
Purple On
Cyan On
Red flash
Red fast flash
Green flash
Green fast flash
Blue fast flash
Green/red
Green/blue
Purple/red
White slow flash
White On
Yellow
Enter
Channel Selection
VFR channels Green On
Red on
Meaning
No power supply of the unit
Power on – everything ok
Bootloader is working
Error, e.g. connection to peripheral lost
Bootloader is working / preparing for update
Update is running
Cooling is active
Connection to LAN and cloud service
Connected to LAN but no cloud service
Learn mode active for registrating unit to the app
Auto update has found a new version and is ready to update
Auto update is ready to check for a new version
Auto update is checking a new version
Global peripherals enrolled
Enrolling mode (global peripherals can be connected)
Select a channel by moving it to the left
Heating
Idle – no heating / no cooling
Cooling
Idle – Room without thermal actuator; e.g. room with
Smart Radiator Thermostat
Idle – Output used for special purposes E.g. External Actuator
Enroling mode (peripherals can be connected)
Output overloaded, heating demand
Missing periphery
Output overloaded, idle, no demand
Output overloaded, cooling demand
Heating blocked
Cooling is blocked
Heating is blocked for room without thermal actuator
Periodic activation (preventive maintenance)
First time opening of thermal actuators
Changing profile settings / restart / updating peripheral
Confirm action, Learn mode to connect to the APP,
Reset a channel (hold 10s), Factory Reset (hold 20s)
Select a channel by moving it to the right
VFR set and ready
VFR active
3 3