Changing The Needle; To Check The Needle; Thread And Needle Chart - Janome HD9 Livret D'instructions

Changing the Needle

CAUTION
Turn the power switch off and unplug the
machine before changing the needle.
z Turn the power switch off. Lower the presser
foot. Turn the needle clamp screw q
counterclockwise with the large screwdriver.
Loosen the screw and remove the needle from
the needle clamp.
q Needle clamp screw
x Insert a new needle into the needle clamp w
e to the right, pushing it up
as far as it will go.
Tighten the clamp screw q
w Needle clamp
e Flat side
* Use an HL x 5 needle

To Check the Needle

Thread and Needle Chart

Fabrics
Broadcloth
Sheeting
Medium Gabardine
Thin jersey
weight
Flannel
Wool
Denim
Jersey
Heavy
weight Tweed
Canvas
Never use a blunt or blunt needle, as it may cause skipped
stitches or thread breakage. Defective needles can ruin the fabric.
Always purchase good quality needles. Change needles often.
Thread Needle (HL x 5) size
Synthetic #50-60
#14
Cotton #50-60
Synthetic #50-60 #14
Synthetic #20-50
#14-18
Cotton #20-50
Synthetic #20-50 #14-16
Synthetic #20-50
#14-16
Cotton #30-50
Synthetic #20-50 #14-18
Synthetic #20-30 #14-18
z
x
w
32
q
e
e