Multi-Stage Cooking" Mode; Cooking Program" Mode - CASO DESIGN EMGS 25 Mode D'emploi Original

15.12 "Multi-stage Cooking" Mode

In this mode you can program up to up to 2 automatic cooking sequences. The sequence
and duration of defrosting, microwaving, or grill (combination) can be adjusted.
If you intend to use the defrost function, this must be programmed as the first function in
the sequence.
Please note
► The automatic cooking programmes and quick start cannot be used for multi-stage
cooking.
Example: If you want to defrost food for 5 minutes and then microwave the food at 80%
power level for 7 minutes proceed as follows:
1) Press for defrosting by time and "00:00" will be displayed .
2) Use or
3) Press and set the power level for microwaving to 80% until the display shows "P
80".
4) Adjust the cooking time by
5) Press to start the multi-stage cooking process.
6) When the end of the cooking time has been reached the system will sound five signal
tones.
Please note
► Please do not confirm the time setting between programming the first and second
cooking programme because that would automatically start the first programme. After
setting the time for the first cooking programme directly enter the function for the
second cooking programme.

15.13 "Cooking Program" Mode

In this operating mode, the cooking programme can be selected from 8 different menus.
Please refer to the table on the next page for more detailed information.
1) Press repeatedly to select the desired automatic cooking program.
2) Press to confirm the selected programme.
caso EMGS 25
to set the defrosting time to a maximum of 95 minutes.
or to 7 minutes.
64