Microwave And Convection" Mode; Multi-Stage Cooking" Mode - CASO DESIGN MCG30Ceramic chef Mode D'emploi

 Starting the cooking programme
After selecting the program, press the button Start /Quick start, to start the
preset cooking programme.
 End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.

13.14 "Microwave and Convection" mode

The device offers four pre-programmed settings, which facilitate combination cooking
using hot air (convection) and microwaves.
 Setting the temperature
Select the temperature you require by pressing the Micro + Convection
button until you reach the level you require (see following table).
 Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.
 Starting the cooking programme
After selecting the program, press the button Start /Quick start, to start the
preset cooking programme.
 End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted
and END will appear in the display.
► You can check the hot air temperature during cooking by pressing the
button Micro + Convection.
Button presses

13.15 "Multi-stage Cooking" Mode

In this mode you can program up to up to three automatic cooking sequences. The
sequence and duration of defrosting, microwave cooking and grilling or hot air mode is
adjustable.
The example below describes the settings for a multi-stage cooking program in the
 Defrost
sequence:
Caso MCG30Ceramic chef
Please note
Display
1 200
2 170
3 140
4 110
 Microwave cook
Temperature
200 °C
170 °C
140 °C
110 °C
63