Battery Indicator; Battery Monitoring; Routine Maintenance - Laerdal Cprmeter 2 Mode D'emploi

Battery Indicator

Battery Monitoring

The CPRmeter 2 continuously monitors the power of its batteries.
On a routine basis, particularly after periods of non-use, check the
CPRmeter 2 battery status by turning on and checking if the low
battery icon is displayed.
If the remaining power is estimated to be less than that required for
a 30 minute CPR event, the visual indicators signal that the batteries
should be replaced before the next use.
A low-battery icon
appears when the
CPRmeter 2 is being
turned off.

Routine Maintenance

1. On a routine basis check the battery status (as described).
2. Replace the batteries at least every 2 years.
3. On a routine basis, check that the CPRmeter 2 has a Patient
Adhesive in place and that the liner remains on it. Replace the
Patient Adhesive at least every 2 years if it is not used.
22 22
A low-battery icon
appears when the
CPRmeter 2 is
being turned on.