Display Icons; Charge The Battery - Celestron INFINIVIEW 44360 Manuel D'instruction

dIsplAY ICONs

ChArGE ThE BATTErY

Plug the small end of the power adapter into the dC
+
In port (11) located on the back of the unit.
Plug the other end into a standard aC wall outlet.
+
The Battery Charge Indicator led (15) will light up
+
red to show the battery is charging.
When battery is fully charged, the Battery Charge
+
Indicator led will turn off and you can unplug the unit.
You can now use Infi niView™ without an external
+
power source continuously for up to 2 hours.
You can monitor the battery power level on the lCd
+
screen. look for the Battery Power Indicator Icon
described above.
NOTE:
If you purchased your Infi niView™ outside of North America (item 44361),
you will notice that the AC adapter has 3 interchangeable plug heads. Refer
to section 9 to see how to change the plug heads.
6
I ENGLISH
Small Image Capture
Video Capture
Time lapse Capture
Number of Images Taken/Number of
Images Remaining
Video Capture Time Remaining
(Hours:Minutes:Seconds)
MicroSd Card Recognized
Video Capture Setting
Current Resolution Setting
Battery Power Indicator
NOTE: The Display Icons can be turned off by pressing the Zoom Button (10) inward.