Celestron INFINIVIEW 44360 Manuel D'instruction page 13

POWeR SaVe
Power Save allows you to conserve battery power by setting
the unit to turn off automatically. The choices for times are:
1.
OFF: Power Save feature is off; unit will not turn off
automatically
2.
5 min.: Unit will turn off after 5 minutes of non-use
3.
10 Min.: Unit will turn off after 10 minutes of non-use
4.
15 Min.: Unit will turn off after 15 minutes of non-use
5.
30 Min.: Unit will turn off after 30 minutes of non-use
FReQUeNCY
This setting has to do with your TV's refresh rate. For USa
(NTSC), use 60Hz; for others, use 50Hz.
daTe STaMP
If you wish, you can display a date stamp on image fi les (but
not on video fi les).
The choices are:
+
1.
daTe/TIMe: displays both daTe and TIMe on the saved
image fi le
2.
daTe: displays only the date on the image fi le
3.
OFF: Will NOT display any daTe/TIMe information
TV OUT
Set your TV out setting to either NTSC or Pal, depending on
your location.
1. Choose NTSC for:
- North america
- South america (excluding Brazil, argentina,
Uruguay and French Guiana)
- Myanmar, South Korea, Taiwan, Japan and
the Philippines
2.
Choose Pal for:
- all countries NOT listed above
NOTE: See map below.
NOTE:
The DATE and/or TIME will NOT be displayed in the preview mode-
only on the recorded image fi le.
13
ENGLISH