Celestron INFINIVIEW 44360 Manuel D'instruction page 15

TrANsFEr FIlEs TO COMpUTEr
Connect your Infi niView™ to your computer via USB 2.0
+
On the lCd screen, choose "Upload Images", using the
+
OK button.
Your computer will copy the fi les on your MicroSd card
+
to your hard drive.
When the transfer is complete, you can open the fi les
+
on your computer.
CONNECT TO Tv:
Insert the 1/8-inch plug on the end of the supplied
+
video cable into the Infi niView™ aV OUT port located
on the back of the base.
Insert the yellow RCa plug on the video cable into one
+
of your television's yellow video input connectors.
NOTE:
Refer to your television's manual to locate your TV's video connector.
Turn on the television. (Be sure your television is tuned
+
to the appropriate input channel.)
You should now see an image of the specimen you
+
are viewing on your television screen.
UsING ThE CElEsTrON pOrTABlE
CApTUrE prO sOFTWArE
Connect the Infi niView™ to your computer as described
+
above.
Choose "Preview on Computer" Mode from the 2 choices
+
on the lCd screen.
Open the Celestron Portable CapturePro Software on
+
your PC.
NOTE:
Once the software is launched, the LCD screen will go blank and you will begin
controlling the microscope with the computer. However, you will still use the
Infi niView™ to control the following features:
NOTE:
When you connect to a computer via USB, the lithium battery will charge.
Video-in on TV monitor
Video-out
15
ENGLISH