On/Off Button; First Starting - Hoover WM AXI Mode D'emploi

WARNING:
Don't touch the display (and the
Touch Control) while inserting the
plug because the machines calibrates
the systems during the first seconds:
touching the display, the machine
couldn't work property. In this case,
remove the plug and repeat the
operation.
To select the different functions, you
can press both the icons and the
buttons above them.

ON/OFF button

l
To turn the appliance on and off, press the
ON/OFF button (for at least 3 seconds).
At the end of the cycle, do not forget
to turn off the appliance by the
ON/OFF button, disconnect the plug
and close the water faucet.

First starting

- Language setting
l
After connecting the machine to the
network and turning it on, press the
STAIN LEVEL or CARE DOSE button
to display the available languages.
l
Select the desired language pressing the
START/PAUSE button.
- Change the language
If you want to change the setting language
you will have to press simultaneously
STAIN LEVEL and CARE DOSE buttons
for about 3 seconds. ENGLISH will appear
on the display, and you will be able to
choose a new language.
Through this
settings will be cancelled.
- Water Hardness setting
This washing machine, thanks to the CARE
DOSE system, is able to dose your
detergent automatically.
quantity of detergent depending on the
water hardness, on the load quantity and on
the chosen cycle (cotton, delicates,etc...)
The default setting for the water
hardness is set in the factory at level 2
(L2) as this satisfies the requirements
of the majority of users.
Water Hardness level:
L1 = LOW (0-12 °fH o 0-7 °dH)
L2 = MEDIUM (13-30 °fH o 8-17 °dH)
L3 = HIGH (≥ 30 °fH o ≥ 17 °dH)
l
To confirm the standard water hardness
level set by the factory, wait a few
seconds.
l
If you want to change the standard water
hardness setting (and consequently the
amount of detergent dispensed), hold
down the CARE DOSE button for a few
seconds. The
HARDNESS will appear on the display
and you can choose the desired level by
pressing the CARE DOSE button again.
The higher the water hardness, the
more detergent will be dispensed.
l
Once chosen the water hardness level,
hold for few seconds the START/PAUSE
button to confirm
Check the water hardness LEVEL of
your city at
company before using the CARE
DOSE function.
72
process all saved
The optimum
wording WATER
your water supply