Field Controls Trio Plus Instructions D'installation page 8

No Symbol Symbol
Name
UVC
Timer
(1H/
2H/
4H/
8H)
Speed
The UVC indicator will blink when the UVC
lamps need to be replaced. After the
UV lights are replaced, press, and
hold the UV light change indicator for 5
seconds to reset the UV light indicator.
Set the timer to control how long the purifier
should operate. Press to cycle between
different lengths of time. The timer light will
toggle between remaining hours according to
time left until shutting down.
For manual mode, press and cycle between
the 5-speed options by pressing the manual
speed button. The purifier will stay in Manual
1-5
mode unless turned off or switched to another
mode.
Meaning