Common Problems And Solutions - Field Controls Trio Plus Instructions D'installation

HEPA filters and activated carbon filters are best replaced every 3 to 6
months, depending on the use situation. High-efficiency HEPA filters,
activated carbon filters, photocatalyst filters, and pre-filters cannot be
washed.
REPLACEMENT OF UVC LAMP
WARNING – Skin or eye damage may result from directly viewing the
light produced by the lamp in this apparatus. Always shutdown and
disconnect the power before replacing or servicing.
Replace lamps with Field Controls Trio Plus UV lamp replacement kit
Part Number # 602604500.
Replacement steps:
1. Turn the appliance off and unplug from power outlet.
2. Remove all the filters after opening front cover panel.
3. Remove the UVC lamps by rotating them 90 degrees.
4. Install new UVC lamps by inserting and rotating 90 degrees to lock in place.
5. Replace filters back into the air purifier.
6. Close front cover panel to complete installation

COMMON PROBLEMS AND SOLUTIONS

Problem
The If the power light is off, the
machine unit is not correctly plugged
does not in. Please confirm the plug
turn on and socket connections
There is a problem with the
Product power connection;
works The filter cover is not
abnormally placed properly.
Fresh air The plastic package of the
cannot be new filter is not removed;
delivered The air outlet of purified is
from the air blocked by foreign matter.
outlet
smoothly
Possible Causes Remedial Action
Confirm the unit is
plugged in.Try unplug
and plug back in the unit.
Please check whether
the plug is inserted into
the socket and check
On/Off button status;
Re-install the filters.
Remove any packaging
from the filter.