Field Controls Trio Plus Instructions D'installation page 11

Step 1 As shown in the figure, with
both hands on the upper side of the
machine, first pull the front case in the
direction 1, then lift the front case
in direction 2.
Remove all filters and packaging
materials from filters.
Step 3 Place the activated carbon filter
screen as shown in the figure. Grasp
the activated carbon filter in the
direction of the arrow and place the
activated carbon filter back into the
appliance with the tag pointing
towards you.
Activated
carbon
filter
Step 2 Place the PRO-Cell Catalyst in
the innermost position closest to the
UVC lamp as shown in the figure.
Grasp the photocatalyst filter in the
direction of the arrow and put the
unpacked photocatalyst filter back
into the appliance with the tag
pointing towards you.
Step 4 Place the HEPA filter as shown
in the figure. Grasp the HEPA filter, as
shown, by the arrow and put the
HEPA filter back into the appliance
with the tag pointing towards you.
PRO-Cell
Catalyst
HEPA
Filter