Philips YS534 Mode D'emploi page 20

EngliSh
20
Problem
The
appliance
does not
work when I
press the on/
off button.
My skin is
irritated after
shaving.
Possible cause
Long hairs obstruct the
shaving heads.
Shaving foam or shaving
gel has accumulated in
the shaving heads.
The rechargeable
battery is empty.
The temperature of the
appliance is too high. In
this case, the appliance
does not work.
When you remove the
adapter from the wall
socket and leave the
small plug in the
appliance, the appliance
does not work for a few
seconds.
Your skin needs time to
get used to the Philips
shaving system.
Solution
Clean the cutters and guards
with the cleaning brush
supplied. See chapter
'Cleaning and maintenance'.
Rinse the shaving heads
thoroughly with a sufficient
amount of water.
Recharge the battery. See
chapter 'Charging'.
Let the appliance cool down.
As soon as the temperature
of the appliance has
dropped sufficiently, you can
switch on the appliance
again.
Remove the small plug from
the appliance.
Skin irritation during the first
2-3 weeks of use is possible.
After this period, the skin
irritation usually disappears.