Philips YS534 Mode D'emploi page 20

EngliSh
20
4 Rinse the beard styler attachment and the
comb separately under a hot tap for some
time.
5 Lubricate the trimmer teeth with a drop of
sewing machine oil every six months.
Storage
Note: Make sure the appliance and the attachments
are dry before you store them.
1 Put the protection cap on the shaver after
use to prevent damage and to avoid dirt
accumulation in the shaving heads.
Note YS534: Store the shaver and all parts in the pouch.
2 Place a comb on the body groomer attachment
for travelling or storage.
replacement
replacing the shaving heads
For maximum shaving performance, we advise
you to replace the shaving heads every two years.
Replace damaged shaving heads right away. Only replace
the shaving heads with original RQ32 Philips shaving
heads. See also chapter 'Ordering accessories'.
1 Follow steps 1-4 from chapter 'Cleaning and
maintenance' under 'Cleaning the shaving
attachment'.
2 Remove the shaving heads and place new ones
in the shaving unit.
Make sure the two wings of the shaving heads fit
exactly into the recesses.