Connecting Ipod/Iphone/Ipad Using Supplied Stand; Watching Ipod/Iphone Videos On Your Tv - Pioneer X-CM31-K Mode D'emploi

iPod/iPhone/iPad playback
2 Open the iPod/iPhone connector port.
3 Connect your iPod/iPhone.
• When iPod/iPhone is not connected to the unit, close
the iPod/iPhone connector port firmly.
Connecting iPod/iPhone/iPad using
supplied stand
1 Connect the iPod/iPhone/iPad cable to the
unit.
2 Pass the iPod/iPhone/iPad cable through the
bottom of the stand and connect it to the iPod/
iPhone/iPad.
3 Set up to stand the iPod/iPhone/iPad.
Watching iPod/iPhone videos on your
TV
To watch iPod/iPhone videos on a television, connect it using
a video cable. When an iPod/iPhone is connected to this unit,
the TV output setting of the iPod/iPhone is automatically set
to 'ON'.
CAUTION
• Before making or changing the connections, switch off
the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
Note
• For detailed instructions on using the iPod/iPhone,
please refer to the manual supplied with the iPod/
iPhone.
• Some iPods allow the TV output setting to be changed
while connected.
05
17
En