Publicité
Les langues disponibles
Les langues disponibles
Fitting kit
- 2 big brackets
- 2 spacers 6x10
Assembly
- Remove the saddle, the rear seat unit and the taillight.
- Remove the rear part of the original undertray (the toolbox is not kept).
- Fix the rear light as shown on photos using the two provided brackets.
- Position the furnished undertray.
- Replace the rear seat unit and the saddle. Fix the undertray using the original plastic rivets.
- Rivet the license plate on the support foreseen for that purpose.
- If necessary, fix the plate with the supplied beleved spacers.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data
of our painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* Any deterioration of the parts due to the presence of any excessive load in the undertray will not be guaranteed.
* A few tyres, as Dunlop D207 or Michelin Pilot Power, not being for the given dimensions, are not compatible with undertray and rear hugger made for original tyres in standard dimensions.
* Harden the rear shock absorber while drivings with load or on dented roads.
- 2 beleved spacers
*For the undertray without cut,
think of cutting the 4 stowage hooks for a correct assembly.
* The "Ermax" mudguard and undertray are compatible.
FITTING INSTRUCTIONS
« CAUTION »
« UNDERTRAY »
ZR 7 1999/2003
Original tyre in 160/60 ZR 17.
Publicité
