Safety Instructions - Victron energy Orion-Tr DC-DC Manuel

3. Safety instructions

SAVE THESE INSTRUCTIONS – This manual contains
important instructions that shall be followed during
installation and maintenance.
• Please read this manual carefully before the product is installed
and put into use.
• Install the product in a heatproof environment. Ensure therefore
that there are no chemicals, plastic parts, curtains or other
textiles, etc. in the immediate vicinity of the equipment.
• It is normal for the Orion Smart DC-DC charger to get hot
during operation, keep any objects that are heat-sensitive
away.
• Ensure that the equipment is used under the correct operating
conditions. Never operate it in a wet environment.
• Never use the product at sites where gas or dust explosions
could occur.
• Always provide proper ventilation during charging.
• Avoid covering the charger.
• Refer to the specifications provided by the manufacturer of the
battery to ensure that the battery is suitable for use with this
product. The battery manufacturer's safety instructions should
always be observed.
• In addition to this manual, the system operation or service
manual must include a battery maintenance manual applicable
to the type of batteries used.
• Never place the charger on top of the battery when charging.
• Prevent sparks close to the battery. A battery being charged
could emit explosive gasses.
Danger of explosion from sparking
Danger of electric shock
5