Victron energy Orion-Tr DC-DC Manuel page 16

6. LED stated
The LEDs will change its state to warn what the Orion Smart is
doing at the moment. There are two LEDs, the blue LED is
dedicated to Bluetooth functionality and the green LED to product
state.
Status LED (Green LED)
• LED off:
o No input voltage;
o Remote shutdown;
o Shutdown by the user;
o Connector over-temperature protection
o User defined under voltage lock-out
o Engine off detected (when in Charger mode)
• LED on:
o Output active on DC/DC Converter Mode;
o Charger in Float State (Battery charged);
• LED Blinking at 1.25Hz:
o Charger in Bulk or Absorption State (Battery is being
charged);
BLE LED (Blue LED)
• LED off:
No input voltage;
o
• LED Blinking at 0.33 Hz:
o Error – needs to be checked on VictronConnect;
• LED Blinking at 1.25 Hz:
Connected via Bluetooth;
o
• LED Blinking at 2.5 Hz:
o Identify;
• LED Blinking once every 5 seconds:
Charger off due to non-error conditions as:
o




LED on:
•
o All other conditions;
14
Remote shutdown;
Shutdown by the user;
User defined under voltage lock-out;
Engine off detected (when in Charger mode);