Important Safety Instructions - Victron energy Blue Smart IP65 Manuel

IMPORTANT SAFETY INSTRUCTIONS

1. SAVE THESE INSTRUCTIONS – This manual contains
important safety and operating instructions for Blue Smart
Charger models.
2. Use of an attachment not recommended or sold by Victron
Energy may result in a risk of fire, electric shock, or injury to
persons.
3. To reduce risk of damage to electric plug and cord, pull by
plug rather than cord when disconnecting charger.
4. An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result
in a risk of fire and electric shock. If extension cord must be
used, make sure:
a) That pins on plug of extension cord are the same
number, size, and shape as those of plug on charger;
b) that extension cord is properly wired and in good
electrical condition; and
c) that wire size is large enough for ac ampère rating of
charger as specified in "Technical Specifications"
5. Do not operate the charger with damaged cord or plug;
contact your service agent or the manufacturer.
6. Do not operate the charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way; contact
your service agent or the manufacturer.
7. Do not disassemble the charger; contact your service agent
or the manufacturer when service or repair is required.
Incorrect reassembly may result in a risk of electric shock or
fire.
8. To reduce risk of electric shock, unplug charger from outlet
before attempting any maintenance or cleaning. Turning off
controls will not reduce this risk.
9. WARNING – RISK OF EXPLOSIVE GASES.
a) BATTERIES GENERATE EXPLOSIVE GASES
DURING NORMAL BATTERY OPERATION. FOR
THIS REASON, IT IS OF UTMOST IMPORTANCE
THAT EACH TIME BEFORE USING YOUR
CHARGER, YOU READ THIS MANUAL AND
FOLLOW THE INSTRUCTIONS EXACTLY.
1