Safety Instructions - Victron energy Blue Smart IP65 12/4 Manuel

Safety instructions

•
Always provide proper ventilation during charging.
•
Avoid covering the charger.
•
Never try to charge non-rechargeable - or frozen batteries.
•
Never place the charger on top of the battery when
charging.
•
Prevent sparks close to the battery. A battery being charged
could emit explosive gasses.
•
Battery acid is corrosive. Rinse immediately with water if
acid comes into contact with skin.
•
This appliance is not designed for use by young children or
people who cannot read or understand the manual unless
they are under the supervision of a responsible person to
ensure that they can use the battery charger safely. Store
and use the battery charger out of the reach of children, and
ensure that children cannot play with the charger.
•
Connection to the mains supply must be in accordance with
the national regulations for electrical installations. In case of
a damaged supply cord please contact the manufacturer or
your service agent.
•
The battery terminal not connected to the chassis has to be
connected first. The other connection is to be made to the
chassis, remote from the battery and fuel line. The battery
charger is then to be connected to the supply mains.
•
After charging, disconnect the battery charger from the
supply mains. Then remove the chassis connection and
then the battery connection.
1