System Test - Health O Meter PRO PLUS 2101KL Mode D'emploi

06

SYSTEM TEST

Before making changes to this scale setting, please refer to page 6 "Menu" to temporarily
activate the Menu key.
01 Battery Test
02 USB Connection
The scale will display the estimated amount of battery life
remaining until the batteries will have to be replaced.
NOTE: In order to complete the battery test, the scale must be
powered by batteries only. Unplug the scale from AC power
source prior to battery test.
The scale will test the connection to the PC and will display a
message "Connection is OK" or "NO Connection".
If "NO Connection" is displayed, check your USB connections
on the scale and on your PC and retest the connection. Refer
to qualified service personnel if problem persists.
15
There are two options
display the time: 12 hour
(AM/PM) or 24 hour.