Philips Lumea SC2001 Manuel D'utilisation page 44

English
44
Problem
The treated areas
become red after the
treatment.
The skin reaction
after the treatment
lasts longer than usual.
Possible cause
You treated an
area for which
the appliance is
not intended.
You have used
a light intensity
which is too
high for you.
The UV filter of
the light exit
window is
broken.
The appliance
is not suitable
for your skin
colour.
Slight redness
is harmless
and normal
and disappears
quickly.
You have used
a light intensity
which is too
high for you.
Solution
Only use the appliance
on the underarms, pubic
area (excluding the
scrotum), shoulders, chest,
back and legs.
Reduce the light intensity to
a level that is comfortable
for you. See chapter
'Preparing for use', section
'Setting the light intensity'.
If the UV filter of the light
exit window is broken,
do not use the appliance
any more. Contact the
Consumer Care Centre in
your country, your Philips
dealer or a Philips service
centre.
Do not use the appliance
if you have a very dark skin.
Do not use it either if your
body hair is light blond, red,
grey or white.
No action required.
Select a lower light intensity
the next time. See chapter
'Preparing for use', section
'Setting the light intensity.