Care And Maintenance - Kärcher NT 65/2 Eco VEX Serie Notice D'utilisation

Operating instructions

Care and maintenance

Danger!
Always pull out the mains plug
when working on the suction
machine.
Replacing the flat pleated filter
or the exhaust air filter
! Open the filter cover (1)
! Replace the flat pleated
filter (2) or the exhaust air
filter (3)
! Close the filter cover, it must
engage audibly
NT 65/2 Eco *VEX
Clean electrodes
! Unlock and remove the suction
head
! Clean electrodes
! Replace the suction head and
lock it in place
Fault instructions
The suction turbine does not
run
! Check the cable, plug, fuse and
socket.
! Switch on the machine.
The suction turbine switches off
! Empty the container.
The suction turbine does not
restart following emptying of
the container
! Switch the appliance off and
wait for 5 s, switch it on again
after 5 s.
! Clean the electrodes as well as
the space between them.
The suction power decreases
! Remove the parts clogging up
the suction nozzle, the suction
tube, the Power Filter Clean
handle, the suction hose or the
flat pleat filter.
! Change the paper filter bag.
! Actuate the filter
cleaner: Power Filter Clean
several times at the handle.
! Engage the filter cover
properly.
English
! Replace the flat pleat filter.
! Check drain hose for leaks
(if provided).
Dust ejects when sucking
! Check the proper mounting
position of the flat pleat filter.
! Replace the flat pleat filter.
The (wet-vacuuming) automatic
switch-off does not respond
! Clean the electrodes as well as
the space between them.
! Constantly check fill level when
vacuuming electrically non-
conductive liquids.
Power Filter Clean switches
regularly
! Detach blocked suction nozzle
or end of hose.
! Stop continuous vacuuming
from liquid tank or deactivate
the Power Filter Clean function
(see chapter on wet-
vacuuming).
! Remove the parts clogging up
the suction nozzle, the suction
tube, the Power Filter Clean
handle, the suction hose or the
flat pleat filter.
! Replace the flat pleat filter.
7