Leg Rests - Autoadapt CARONY Go! Manuel D'utilisation

Backrest
Inclination
adjustment
Headrest
Armrest
Height
adjustment

Leg rests

Height
adjustment
Angle
adjustment
18
The backrest inclination is limited to
avoid tilting.
The inclination is adjusted by using
the handle at the side of the backrest:
clockwise for rising and counter clock-
wise for lowering.
A lumbar support is available as
option. This is an inflatable rubber
cushion which is adjustable by air and
placed under the backseat cushion.
The headrest is adjusted by using
the hand to push it up or down,
back or forth.
The "Komfort" headrest is optio-
nal and can be adjusted at two
joints, which makes it very adap-
table for special needs.
Angle adjustment:
Raise the armrest slightly and
loosen the adjustment screw. Turn
the screw clockwise to adjust the
angle upwards and counter clock-
Angle
wise for lowering it.
adjustment
Height adjustment:
Move the height adjustment screw
to a suitable hole.
The foot rests are length adjusted
by first loosening the wing nut.
Angle adjustment: Loosen the
screw of the angle cylinder by
using a 6 mm Allen key.
Lumbar support as option.
The optional "Komfort"
headrest.
Angle adjustable legrests as
option.