Removing The Refrigerator Doors - Samsung RF32FMQDBSR Guide D'utilisation

REMOVING THE REFRIGERATOR
DOORS
If the refrigerator is too large to pass through your
doorway easily, you can remove the refrigerator
doors.
Tools you will need (Not provided)
Philips screwdriver Flat-blade
(+) screwdriver (-)
Allen wrench
Pliers
5/32" (4 mm)
Disconnect power to the refrigerator before
removing the doors or drawers.
WARNING
• Be careful not to drop, damage or
scratch the doors/drawers while
removing them.
• Use care when you remove the doors/drawers.
The doors are heavy and you could injure
yourself.
• Re-attach the doors/drawers properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
DISASSEMBLE THE
REFRIGERATOR DOORS
1. With the door closed, remove the 3 screws
holding the Top Cover (A) with a Phillips (+)
Screwdriver, and then remove the Top Cover
with the entire wire-harnesses attached.
10_ setting up
DA68-02918A-05.indb 10
2. Separate the two connectors on the left door
and the one connector on the right door. If there
are red clips on the water tube, remove them
now. Press the white sleeve [D] of the Water
Tube Coupler, and then separate the Water
Tube [E].
- Not all models have red clips.
E
Red Clip
(6.35 mm)
Socket wrench
3/8'' (10 mm)
E
3. Pull up the Fixer Lever (B), and then pull it
Allen wrench
forward.
7/32'' (5 mm)
4. Remove the Hinge (C).
C
5. Lift up the Fridge Door and take it off.
• While disassembling and reassembling
CAUTION
• Do not let the door fall down.
A
D
B
the door, make sure that the electric
wires are not peeled off.
D
B
14. 6. 25. 10:57