Nyrius ARIES Prime Mode D'emploi page 10

BUTTON
Press the POWER button on TOP of the receiver to go
POWER
from " Active mode" to " Active Standby mode".
Press the INFO button on TOP of the receiver. The
Signal Quality, Source, Channel and Resolution will be
INFO
displayed on the OSD for your reference. Press the INFO
button again to exit.
AUDIO BIT RATE SUPPORT
• Digital Audio from HDMI inputs: Up to 6Mbit/s bit-rate support.
• Support AC3 and DTS.
• 2-Channel PCM audio : 16~24 bits audio sample with 32~48KHz sampling rate
2 CHANNEL
PCM
16 Bits
24 bits
Windows OS Display setting of Laptop for external display:
Windows7 OS:
1. Press key + P key
2. There is a POP icon displayed on the screen, as seen below :
3. Select Clone mode, Extend Display or Project out only to enable external display.
32KHZ 44.1KHZ
YES YES
YES YES
SETUP
RECEIVER
OSD
48KHZ
YES
YES
- 10 -
OSD DISPLAY
HDMI
CH10
1280x1024
= OFF
96KHZ
YES
YES