Remote Control; How To Install Batteries; Battery Precautions - JVC LT-39E330 Manuel D'instructions

Remote control

1
2
3
4
5
6
7
8
9
10
11
1.POWER Button - Use to turn the power on/off to
the TV.
2.DISPLAY Button - When you press this button,
the current information will be displayed on a
screen. To remove the display from the screen,
press this button again.
3.Direct Channel Selection Buttons (0-9) - Allows
direct access to any channel of the TV.
4.– Button -This button is used when selecting
digital channels.
5.MENU Button - Use to display the On-Screen
menu function.
Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.
2. Install two "AAA" batteries (supplied).
3. Replace the battery compartment cover.
If this symbol is shown, it is only
valid in the European union.
EN 10
6.CURSOR ▲/▼/◀/▶ Buttons - Use to operate the
12
menu functions of the TV.
13
7.ENTER Button - Use to enter or select
information for On-Screen operations.
8.MUTING Button - To turn off the sound, press
this button once. The TV will be silenced and the
symbol will appear on the screen. The muting
14
feature can be released by pressing the MUTING
button again or one of the VOL (VOLUME) + / –
15
buttons.
9.VOL (VOLUME) + / – Buttons - Press the +
button to increase, or the – button to decrease the
sound level.
16
10.INPUT SELECT Button - Use to change the
external input.
11.CCD Button - Use to select Closed Caption to
17
"CC Off", "CC On" or "CC on Muting".
12.SLEEP Button - To set the TV to turn off after a
18
preset amount of time, use the SLEEP button on
the remote control.
13.PICTURE SIZE Button - Use to change the
picture size.
14.RECALL Button - This button allows you to go
back to the previous channel selected by just
pressing the RECALL button. Press this button
again to return to the channel you were watching.
15.EXIT Button - Press to remove setup menu.
16.AUDIO Button - Change soundtrack language.
17.CH (CHANNEL)
channels of the TV.
18.USB Media control buttons - See page 24.
Use two "AAA" size batteries. The batteries may last
approximately one year depending on how much the
remote control is used. For best performance, it is
recommended that batteries should be replaced on a
yearly basis, or when the remote operation becomes
erratic. Do not mix old and new batteries or different
types.

BATTERY PRECAUTIONS:

• Batteries should not be exposed to excessive heat
such as sunshine, fire or the like.
• The remote control unit uses infrared beams to
transmit signals, so sunlight or fluorescent light on
the remote sensor may shorten operating distance.
• Incorrect use of batteries may cause them to leak
or burst. Read the battery warnings and use the
batteries properly.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable, (Ni-Cd, Ni-MH, etc.) batteries.
• Remove batteries if the remote control will not be
operated for an extended period of time.
/ Buttons - To change the