LaCie Biggest Quadra Guide D'installation Rapide page 5

2
Initialize the Disks
a. Ensure that the drive trays are not locked
and then slide them out from the Biggest
Quadra slightly.
b. Connect the power cable to a grounded
electrical outlet and to the Biggest Quadra.
Turn on the Biggest Quadra using the
switch on the back.
c. Slide each of the drive trays back into the LaCie Biggest Quadra, and push the
drive tray handles flat to lock the drive trays into place.
The disks will be initialized automatically. The duration of this process depends
on the RAID level you selected and the capacity of disks installed.