Control Panel; Child Lock - Haier HD90-A2979 Mode D'emploi

EN
1 Delay button
2 Child-lock indicator
3 Delay indicator
4 Signal indicator
5 Clean fi lter indicator
6 Time button
4.1 Delay button
Delay function for delay start, press the button to set time (in
1 intervals up to 12 hours).The appliance should be fi nished
in, afterwards press to start (Fig. 4-2) the delayed operation.
Notice
This function should be set after you have fi nished all the options, otherwise when you
turn the knob or press the button, the function will be delected automatically.
4.2 Child lock indicator
To activate the Child-lock function after a cycle has been start-
ed, press the Childlock button (Fig. 4-3) for 3 sec. until the in-
dicator icon lights up. To deactivate press the button for 3 sec.
again.
Notice
When the cycle ends or the power supply is interrupted, the function will not be
cancelled automatically.
4.3 Delay indicator
When choose the delay program (Fig. 4-4), It will lights up.
4.4 Signal indicator
You can choose signal as you need. To active the signal
function after switching on the dryer, press i-Refresh and
Temp. (Fig. 4-5) for about 3 seconds until the beep sounds.
To de-activate press both buttons for 3 seconds again
until the beep sounds.

4-Control panel

3 5
1 2 4
Delay
Dry Level Wrinkle Free
Childl oc k
Mix S ynthetics T owel Duvet Wool
Delicate Bulky S hirt Sp orts Babycare
11
12 13 14 15
7 Temp. button
8 Start/Pause button
9 Program knob
10 Power button
11 Dry level button
12 Childlock button
6 8
7 9
T emp.
i-Re fres h
Warm Up T imer
Cotton
Quick Dry
16 17
13 Empty tank indicator
14 Display
15 Door unlock indicator
16 Wrinkle Free button
17 i-Refresh
Delay
Childlock
+
T emp.
Wrinkle Free
i-Re fres h
4-1
10
4-2
4-3
4-4
4-5
T emp.
9