Transport In Carrier (Accessory With Locking Plate) - Glen Dimplex DHW 300VD+ Instructions D'installation Et D'utilisation

English

3.4 Transport in carrier (accessory with locking plate)

The carrying bag accessory can be used to transport the heat
pump horizontally within the building for a short time. For this,
the cover must be removed and the locking plate supplied with
the carrying bag must be mounted. The locking plate is fixed in
place between the transport lug of the compressor and the di-
viding wall using the mounting material provided.
Fix the guard plate
on the compressor
It is important to ensure that the device is not transported over-
head during the entire transport process.
ATTENTION!
The heat pump must not be transported overhead.
EN-6
The locking plate must be removed prior to commissioning!
guard plate
Contact surface
heat pump in
the carrying bag
451905.66.07 · FD 9912
ATTENTION!
Fix the guard plate
on the dividing wall
DHW 300VD+
www.gdts.one