How To Install The Product; Mount The Base Unit - Axis Communications Q8752-E Guide D'installation

AXIS Q8752-E Bispectral PTZ Camera

How to install the product

DANGER
Risk of electric shock. All cables shall be de-energized before installing the product.
CAUTION
The electrical connections and conduit installations shall be made by a certified electrician
and in compliance with local regulations.
CAUTION
Risk of injury. Moving parts. Keep your body parts away from the product when in
operation. Disconnect from power supply before installing or performing maintenance
on the product.
CAUTION
Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect
from power supply and allow the surfaces to cool before performing maintenance on
the product.

Mount the base unit

1
Base unit
1. Remove the four base unit screws (T30).
2. Simultaneously pull and turn the base unit counterclockwise until the arrows on the base
unit and the rest of the positioning unit align.
3. Remove the base unit.
10